TWR-IR, TWR-DIN – Thermal Watch Infrared receiver, DIN-receiver

  • 1, 5 or 13 ports for IR-Receiver
  • Modbus RS485 communication to connect to SCADA, BMS
  • 1 NO dry contact, 1 NC dry contact to connect to local alarm system
  • 12 to 24VDC power supply
  • DIN 3 modules as per EN60715
  • Can be used in environment up to 36 kV
TWR-IR – Thermal Watch Infrared receiver is a device that will receive infrared signal from TWS sensor and transmit this information to main body – TWR-DIN DIN receiver.
TWR DIN-receiver is a device that connects infrared receivers. TWR-DIN can connect 1, 5 or 13 IR-receiver, allowing to install TW system in the electrical panels with a big number of compartments, for instance, motor control centers, large switchgears with few separated compartments (e.g., busbars compartment, incoming cables compartment, CB compartment, etc.).
TW DIN-receiver after transmits an ALARM signal to SCADA or BMS system by Modbus or to any other external system via dry contact output.
MEMORY
  • 288,000 measurement records
  • 200 sensors send data every 1 hour for 2 months.
  • 72,000 alarm records

REPORTING FORMAT

  • Identification of TWS : 11bits, 4 digits, 0 to 2048
  • Temperature: 8 bits, 3 digits, 0 to 128℃
  • Battery : 1 bit, OK / NOK
  • Mode: 2 bit, Alarm / Commissioning / Measurement / Test
  • TWR-DIN1
    1 IR receiver
  • TWR-DIN5
    5 IR receiver
  • TWR-DIN13
    13 IR receiver